Double line RGB display from wf2 controller

maxresdefault 7

Hello, friends welcome to my blog. In this blog, we learn about how to make 2 line RGB P10 display from the wf2 controller.

How to make 2 line RGB P10 display from WF2 controller

 

Parts required :

  1. P 10 RGB Tile  https://koshielectronics.com/product/p10-rgb-led-module/ 
  2. Power supply https://koshielectronics.com/product/5-volt-20-amp-smps/
  3. wf2 controller. https://koshielectronics.com/product/p10-display-controller/

Wiring :

1619174706606

Software : HD 2018 Or android app 

download – App

This image has an empty alt attribute; its file name is 1618995706827-233x300-1.jpg

Steps to be followed :

Step 1 Turn on the power supply.

Step 2 Now turn off the mobile data then go to the wi-fi. Connect the device to wi-fi. Wi-fi name is WF2_172e5cb87057.In case this name is not shown what you have to do is to turn off the supply for a while and then on the supply. With this, our wi-fi name is going to be a show. After that enter the password ie..88888888 then, click on connect.We see that wi-fi is connected.

1619174282909

Step 3 Open the Led Art app. After that create a display. On the screen, we see the card name WF2_172e5cb87057, then press on add button.

1619175175145

Step 4 After that make the settings, we have 2 tiles. Select RGB P10 display width 32, height 32, device name W series, etc. you can select accordingly then press OK.

1619174282886

Step 5 Next screen is open. Here we enter the text whatever you want to display on the board. You can write text in a colorful way also. For this, you have to select the text then click on the color which you want. You can also change the font size of text, speed of text, etc. whatever you want to change. After that click on the send button.

1619174282897

Step 6 On the RGB P10 display text is running upside down. To solve this problem you have to select the correct IC number of the RGB P10 display board.

1619174282900

Step 7 To solve this problem you can go to the first device then click on hardware. After that enter password ie..888. The next screen is open. Here you can select C39 which is the P10 number. After select this press on manual configuration. If the device show disconnected you have to reconnect again with the same procedure as mentioned in step 2.

1619174282906

Step 8 After reconnected press on manual. As soon as our IC matches perfectly we see that on RGB P10 display text moving properly.

1619174282902 1

Video Tutorial - wf2 controller

P10 single color (W0) Wi-Fi controller

hd wo

Hello, friends welcome to my blog. In this blog, we learn about

P10 single color (W0) Wi-Fi controller

Parts required:

  1. W0 card controller
  2. Power supply 5V
  3. Connectors and FRC
  4. 32*3 P10 led display module-1

Wiring ofP10 single color (W0) Wi-Fi controller

How to use P10 single colour (W0) Wi-Fi controller

Software

download – App

1618995706827 233x300 1
Steps to connect display with Led Art app:

Step 1 Power the controller

Step 2 Download Led Art software from playstore

1619009287874 1 edited 1

Step 3 Firstly turn off the power supply for a sec and then turn on.After go to the wi-fi andconnect the wi-fi.NaMe of wi-fi is W00_1583579807.In case this name is not shown what you have to do is again turn off the supply for a while and the on the supply.With this ,our wi-fi name is going to be a show.After that enter the password ie..88888888 then,click on connect .We see that wi-fi is connected.

1619080791426

Step 4 Open the Led Art app.After that create a display.On the screen we see the card name W00_1583579807,then press add button.

1619080344897

Step 5 After that make the settings,we have 3 tiles .How to calculate 96, the size of matrix of one tile,height has 16 led and in width there is 32 leds.So we have three tiles so how to calculate is 32*3=96.Select width 96 ,height 16 ,device name W series etc you can select accordingly then press OK.

1619080344907

Step 6 Next display is open.Here we enter the text whatever you want to display on the board.Here we see that display is moving very slowly,for this we click on display statics then click on continuous move left then click on send button to check how the text is moving.

1619080344916

Step 7 We see that text is moving fastly,we click on return button then we see the speed option,we set our speed 20.To bold the text click on B.After that click on send button.

1619081105188

Step 8 Now we set the border.Go to border option.According to you, you can select the border whether you want one line border or two line border then click on send .

Step 9 The tile of a lot of people will run upside down so what we have to do is go to device option then hardware then enter the password ie..888.This is called scanning mode.We see the list of P10,click on P10 16*32 then press send.According to you,you can select this.

1619080344934

Step 10 What will I do if I want to drive a clock on it.Go to program after that we will reduce the size of new program we create.Lets run a number before the clock ,go to program,click on plus sign,click on add text.We had a number in the space which we had saved like 12345 then press send.

1619081716226

Step 11 Now we run clock ist delete the number then again go to program then add clock.Here we see two types of clock you can select clock of your choice then click on send.In this way you can run your display.

1619080344937

Video Tutorial – P10 single color (W0) Wi-Fi controller

How to reset huidu controller password

1619005077756

Hello, friends welcome to my blog in this blog we learn about how to reset huidu controller password.

Software –

download – App

1619009287874 1 edited

Problem :

When we buy the display from somewhere with a default password set in it. This password is either set by the company or set by where you buy this.

Before opening the Led Art app we can first open the wi-fi. After open the wi-fi we see an available wi-fi network.We select WF-1e8B162c5807.

After that, we enter the password ie..88888888.This is the default password that is set by the company.

If the password is matched then it is correct or if not matched that’s means there is some error in it.

So we can reset the display by following the below steps.

Steps to be followed to reset the password :

Step 1 Open the back panel of the display. As we see that there is a power supply,3 modules, and a card connected in this panel. Here we can only reset is WF-1 which comes for RGB controller.

1619005077773

Step 2 On the WF-1 controller there is a button given on the controller named “Test Button”.

1619005077756
How to reset huidu controller password

Step 3 Cut off the power to turn off the LED glowing on the controller.

Step 4 Press and hold the test button and turn on the power.

How to reset huidu controller password
How to reset huidu controller password

Step 5 Wait for 20 sec and you will see that the LED will blink faster.

Step 6 Leave the test button after you see the led blinking faster.

Step 7 After this your display will show these dotted lines.

Step 8 Firstly connect your wi-fi. The wi-fi name shown on the screen is WF-1e8B162c5807. After that enter the default password ie..88888888.Now go to the mobile app

1619005077766

Step 9 Feed the text and then press on send button which is given on the top right-most on the screen. But before sending, go to the app settings and add a device on the mobile app.

images

Step 10 Select the device and then send it. Now you can see that your display is ready.

1619005077769 1

How to reset huidu controller password video tutorial

This method is applicable for different types of huidu controller