How to reset huidu controller password

1619005077756

Hello, friends welcome to my blog in this blog we learn about how to reset huidu controller password.

Software –

download – App

1619009287874 1 edited

Problem :

When we buy the display from somewhere with a default password set in it. This password is either set by the company or set by where you buy this.

Before opening the Led Art app we can first open the wi-fi. After open the wi-fi we see an available wi-fi network.We select WF-1e8B162c5807.

After that, we enter the password ie..88888888.This is the default password that is set by the company.

If the password is matched then it is correct or if not matched that’s means there is some error in it.

So we can reset the display by following the below steps.

Steps to be followed to reset the password :

Step 1 Open the back panel of the display. As we see that there is a power supply,3 modules, and a card connected in this panel. Here we can only reset is WF-1 which comes for RGB controller.

1619005077773

Step 2 On the WF-1 controller there is a button given on the controller named “Test Button”.

1619005077756
How to reset huidu controller password

Step 3 Cut off the power to turn off the LED glowing on the controller.

Step 4 Press and hold the test button and turn on the power.

How to reset huidu controller password
How to reset huidu controller password

Step 5 Wait for 20 sec and you will see that the LED will blink faster.

Step 6 Leave the test button after you see the led blinking faster.

Step 7 After this your display will show these dotted lines.

Step 8 Firstly connect your wi-fi. The wi-fi name shown on the screen is WF-1e8B162c5807. After that enter the default password ie..88888888.Now go to the mobile app

1619005077766

Step 9 Feed the text and then press on send button which is given on the top right-most on the screen. But before sending, go to the app settings and add a device on the mobile app.

images

Step 10 Select the device and then send it. Now you can see that your display is ready.

1619005077769 1

How to reset huidu controller password video tutorial

This method is applicable for different types of huidu controller

How to use WF-1 P10 RGB Controller

How to use WF-1 P10 RGB Controller

How to use WF-1 P10 RGB Controller 

Hello friends welcome to my blog in this blog we learn about how to use WF-1 controller by  android app

Parts required :

I used the following parts in this project :
  1. Power supply –https://amzn.to/3vCtUh8
  2. HUIDU HD-WF1  controller – https://amzn.to/3b0Obou
  3. P10 RGB LED module –https://amzn.to/3nHE3pM

Application software LED Art

 Download  App

Steps to use this controller :

Step 1 – Take RGB board.After that connect the controller to the RGB tile with the help of FRC Cable and then connect board to the power supply with the help of cable .For the supply we have two cables with positive and negative pins which we have to connected on the power supply.It can operate on 5V.

How to use WF-1 P10 RGB Controller
P10

Step 2 Turn off your mobile data then open wi-fi and connect it to your controller. The Wi-Fi name is WF-1 and after that, we enter the password eight times we press 8 then click connect.

 Open the Led Art App on your mobile phone.

1618995706827

Step 3 – After opening the app go to the new program we see some details like controller name, the board size, etc. Without any changes we press OK. After that, we see the text on the screen, whatever changes we want to change like text font, animation, speed of text, etc we can change our accordingly.

screen 1

Then we press send button. We see that text is running on the board. We you found that on board text is not moving properly or text is moving upside down as shown in picture.

1618993896148 1

Step 4 – If this type of problem occurred go to the device then select hardware. After that press three times 8 as a password.

750x750bb 1

Step 5 – A list is open on the screen we can see here the different types of P10. According to the IC number, we can select this. We can search C77 then select it, then proceed. After that, we can see the text is moving properly. Here we can select multicolor text also. In this way, we can use our WF-1 controller.

1618996101417

 

https://youtu.be/j_4vH6YK-WQ
Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on whatsapp
Share on telegram
Share on pinterest