How to change P10 WiFi display password | Huidu controller setting
Hello, friends welcome to my new vlog in this vlog we learn about how to change the P10 wifi display password
When we buy the display from somewhere with a default password set in it. This password is either set by the company or set by where you buy this.
Before opening the Led Art app we can first open the wi-fi. After open the wi-fi we see an available wi-fi network.We select WF1_f55dbac331d5.
Follow these steps to change the password :
Firstly connect your wi-fi. The wi-fi name shown on the screen is WF1_f55dbac331d5. After that enter the default password ie..88888888.
We have to disconnect the mobile data.
Once the wifi is connected move to the next step.
4. Open the led Art app ,click the device icon which is given below.
5. click the wifi symbol .
6. When we click the wifi symbol it ask to enter the password & the default password is ..888.
7. Then their is wifi & password reset option is given ,you can easily change it.
8. Once we change the wifi name & password directly it create the error.
9.To avoid the error we should use WF1 before the wifi name & name and numbers are use together for password. i.e..
When all the process done and move forward we should keep in mimd that we must remove the username of wifi which is created by the company because it try to connect to the default username & we experience some defficulties.
How to change P10 WiFi display password/ Video Tutorial
Step 1 Go to the wi-fi and connect the wi-fi. Name of wi-fi is WF1_1c8fa9e5ca94.We see that wi-fi is connected.
Step 2 Open the Led Art app .After that create a display. On the screen we see the card name WF1_1c8fa9e5ca94.,then press add button.
Step 3 After that make the settings, we have 4 tiles .Select width 128 ,height 32 ,device name W series etc. you can select accordingly then press OK.
Step 4 Next display is open. Here we enter the text whatever you want to display on the board. We click on display statics then click on continuous move left then click on send button. We see that next is moving upside down. This is because the proper IC number is not selected.
Step 5To solve this problem you can go first device then click on hardware. After that enter password ie..888.The next screen is open. Here you can select C62 which is P6 number. After select this press on manual configuration. We see that text is moving correctly.
Step 6 If you want to run the text in multi-colour you can set the colour according and also you can set the border of the text of your choice by clicking on border open and select border you your choice. After that text is moving like this.
Step 1 Go to the wi-fi and connect the wi-fi. Name of wi-fi is W00_130937816.After that enter the password ie..88888888 then, click on connect. We see that wi-fi is connected.
Step 2 Open the Led Art app .After that create a display. On the screen we see the card name W00_130937816,then press add button.
Step 3 After that make the settings, we have 2 tiles .Select width 32 ,height 32 ,device name W series etc. you can select accordingly then press OK.
Step 4 Next display is open. Here we enter the text whatever you want to display on the board. We click on display statics then click on continuous move left then click on send button. We see that text is moving.
Step 5 You can also set the border, control the speed of text and so many things according to you for P10 display board.
Step1 When you buy the controller, you will get an app in the name ofkoshi wi-fi.
Step 2 Open the wi-fi, you will see the wi-fi name koshi connect to that. After that enter the passwordkoshi1234and connect to this wi-fi.
Step 3Go to the application and click on connected.
Step 4If you tick on the connect at start up what happened that when you close the app and after that when you next time open your app, your app will automatically connected. You don’t need to connect again.
Step 5 Now lets talk about the buttons given on the app. First button which is green in colour is ON/OFF button. Through this display can be off/on.2nd button is of microphone. Whatever you speak that’s display on the screen.In this we have two features first Caps and another auto.
Step 6 If you click on auto and speak, we see that the text is moving in small letter. When you off the auto and click on caps then speak again, we see that text on the board is moving in the capital letter. If you off the both then nothing is moving in the display untill or unless you click on send button which is blue in colour. When you not click on that button the text which you enter previously that text is running on the board continuously.
Step 7 Now you see the next features which is Brightness, Text speed and Effect change.You can set all these according to you as you want.
Step 8 Next button is play and pause button. If you enter the text and want to stop it then click on pause button. Here we have six colour according to you, you can set the effect.
Step 9 At the top right of the screen we see the power button, through this we can exist from the screen .Another option is of clock .If you want to run the clock firstly clear the text. For this what you have to do is select text option ,clear the text screen and then click on send. We see that on the screen timer is running. You can also pause the timer by clicking on pause button.
Step 10 Next is the time option. If you want to ON/OFF the display you can set the time. In mode1 you can set the time according to you and click on turn off and in mode 2 again set the time and click on turn on then click on save. As you have seen that the time which you set according to that function will perform.
About led badge display: In this display, we have two buttons. A symbol is given in front of each button so that we will know which button will be used for what purpose. When we press the power button for some time the display is on first we see the battery symbol after that text is displayed which we have fed on. When we press on the setting icon the brightness has been changed.
Use: Led badge display is used on marriages, parties, etc. so that we can be able to identify each service separately.
Steps to program led badge display :
step 1 Firstly connect the cable to the laptop or computer. After that connect the device to another side of the cable.
Step 2 When you connect the USB that goes to my computer. Here we see the USB folder click on that here we see HD Smart V3.9.exe software name click on that and install it.
Step 3 After installation they said that select screen size. According to your display select this. On the cover, the display size is also mentioned you can see it there also.
Step 4 After that we see the two displays one for the text and another in which text is the display.
Step 5 Now we enter the text on text display. Here you can set the speed of text, effect, bold the text, set the border, etc. according to your need. After that click on send. We see that text is moving on it. After that remove the display from the USB. Press on the power button of the led badge display we can see that text is moving on it.
Step 6 You can also show the image on the board by click on the image given on the right side of the screen.
Hello friends welcome to my blog. In this blog we learn about How to use HD 2018 software for programming P6,P8,P10 display module.
Software : HD 2018
How to download HD 2018 software :
To download HD 2018 software, first of all, you will open Google, after that, you have to search koshielectronic.com, after that go to the software section, we see the software name HD 2018. Click on that and download this software.
Steps how to make animation on HD 2018 software:
Step 1 Open the HD 2018 software
Step 2 Go to file then new screen and then enter the password ie…888 then click Ok .
Step 3 Next screen will be open, what is there will ask us the card name, then the card name is HD-WF1 which is used for RGB tile. The total P6 tile used is 3. In one title there is a 32*32 matrix. Than 32*3=96.In height, we have 32 leds.
Step 4 There is another setting Hardware Setting. In panel scan, you can select the IC number. Wherever you buy this tile, you will ask from there what IC it is used in. After that select the IC number. Our tile which we used is [C62] P6 1/8S HUB75 GK. If you don’t know then one by one apply for the number according to your tile. The number that matched that is your IC number.
Step 5 Now next screen is open. Here we want to run 3d text .On the screen we see the 3D text option press enter. After that it shows a region on the screen. Our text will go as far as pulling region.
Step 6 At the bottom of the screen we see different options like effects, background etc. Another option are also there like zoom in, zoom out, left ,right, up, down etc , you can apply any of these according to your choice.
Step 7 Now we enter the text ,first we press on edit option .After that set the width and length and also select the colour whose text you want to play, then write the text.
Step 8 We see some arrows like left, right, up, down. When we click on that the text is running accordingly. When we go to the movement side when we click on that text is moving accordingly. We can also bold the text and maintain the speed of text and so many things can be changed so you can make changes according to you.
Step 9 Now make next program click on 3D,then go to edit,then write the text.You can bold the text and change the font size according to you .
Step 10 You can also set the background of your text .Go to background option then select background your choice
Step 11 To show colourfull words go to colourfull word option select any of them which you want.
Step 12 Now we take the output so what we have to do is connect the pen drive to the computer. After that format the card. Now we see the U-disk option. In U-disk we see the file size. Now we see the removal disk option we export this.
Step 13 After export the file the two program which we made are on the pen drive.
Step 14 In pen drive folder we see the different files. Now we connect this to display.
Step 15 Now we connect pendrive to display.You can also program through computer.
Step 2 Now turn off the mobile data then go to the wi-fi. Connect the device to wi-fi. Wi-fi name is WF2_172e5cb87057.In case this name is not shown what you have to do is to turn off the supply for a while and then on the supply. With this, our wi-fi name is going to be a show. After that enter the password ie..88888888 then, click on connect.We see that wi-fi is connected.
Step 3 Open the Led Art app. After that create a display. On the screen, we see the card name WF2_172e5cb87057, then press on add button.
Step 4 After that make the settings, we have 2 tiles. Select RGB P10 display width 32, height 32, device name W series, etc. you can select accordingly then press OK.
Step 5 Next screen is open. Here we enter the text whatever you want to display on the board. You can write text in a colorful way also. For this, you have to select the text then click on the color which you want. You can also change the font size of text, speed of text, etc. whatever you want to change. After that click on the send button.
Step 6 On the RGB P10 display text is running upside down. To solve this problem you have to select the correct IC number of the RGB P10 display board.
Step 7 To solve this problem you can go to the first device then click on hardware. After that enter password ie..888. The next screen is open. Here you can select C39 which is the P10 number. After select this press on manual configuration. If the device show disconnected you have to reconnect again with the same procedure as mentioned in step 2.
Step 8 After reconnected press on manual. As soon as our IC matches perfectly we see that on RGB P10 display text moving properly.
Hello, friends welcome to my blog. In this blog, we learn about P6 full-color display using D15 huidu card D15 card come with different features you upload program through a different medium ( using a mobile app, using Pendrive,or with the help of a laptop ) in this article we learn how we program through an android app you run text, video, gif file and set clock through you android app this controller is made huidu which is a well-known company for making RBG display professional controller
Steps to be followed: for P6 full-color display using D15 huidu card
Step1 Download Led Art software from playstore.
Step 2 Then go to the wi-fi and connect the wi-fi. Name of wi-fi is D15-20-B0398. After that enter the password ie..88888888 then, click on connect. We see that wi-fi is connected.
Step 3 Open the Led Art app. After that create a display. On the screen we see the card name Box Player or you can change the name according to you, then press add button.
Step 4 After that next screen is open. Here you enter screen name according to you ex- Screen 16*16,then set screen width etc. as shown below. What we have in width is in one tile we have 32 matrix which means the width has become 32*30.So we have 4 tiles in length, the width is 32*4=128 and height is 128.Then press OK.
Step 5 Display is shown on the screen. After display shown on screen press the add button. After that we can enter text, images, video etc. so many varieties are available here you can run any of them. For ex- We want to run text ,so what we have to do is we click on text option after that text screen is open. In screen we enter the text which we want to display on the board like Welcome All. In this, we can also run each text with different colours. We can also change the font size of text and so many things. Then press OK.
Step 6 After setting all things according to you ,you can click on send button. The display is like this.
Step 7 If you have to set the background, you have to firstly click on add then click on animated words then go to effect then select effect and press send. If you want to add more effects on this you can program this on computer and feed program through USB.
Step 8 If you found that text is not running properly so what you have to do is go to device then hardware then enter password ie..888,then select your perfect IC number. Click on universal module, you should know which is your module. After that select your module then click OK. By doing this your display is running properly.
Step 9 Now we run image on the board. Press on add button then go to image, there is a point on side firstly click on that button then click on send button.
Step 10 Now we run the video on the board. Again press on add then go to video then select the video which you want to display then click on send button.
Step 11 Now we run clock on the board. Same step is followed as told above but here we select clock. Here we see that there is a two type of clock .You can select any clock you want to run. Select things what to display in the clock like date, weeks, intervals etc. then press on send.
Step 12 If you want to display name on clock then click on clock then go to settings select title, enter your text the press ok. Move back then press on send button.
Step 3 Firstly turn off the power supply for a sec and then turn on.After go to the wi-fi andconnect the wi-fi.NaMe of wi-fi is W00_1583579807.In case this name is not shown what you have to do is again turn off the supply for a while and the on the supply.With this ,our wi-fi name is going to be a show.After that enter the password ie..88888888 then,click on connect .We see that wi-fi is connected.
Step 4 Open the Led Art app.After that create a display.On the screen we see the card name W00_1583579807,then press add button.
Step 5 After that make the settings,we have 3 tiles .How to calculate 96, the size of matrix of one tile,height has 16 led and in width there is 32 leds.So we have three tiles so how to calculate is 32*3=96.Select width 96 ,height 16 ,device name W series etc you can select accordingly then press OK.
Step 6 Next display is open.Here we enter the text whatever you want to display on the board.Here we see that display is moving very slowly,for this we click on display statics then click on continuous move left then click on send button to check how the text is moving.
Step 7 We see that text is moving fastly,we click on return button then we see the speed option,we set our speed 20.To bold the text click on B.After that click on send button.
Step 8 Now we set the border.Go to border option.According to you, you can select the border whether you want one line border or two line border then click on send .
Step 9 The tile of a lot of people will run upside down so what we have to do is go to device option then hardware then enter the password ie..888.This is called scanning mode.We see the list of P10,click on P10 16*32 then press send.According to you,you can select this.
Step 10 What will I do if I want to drive a clock on it.Go to program after that we will reduce the size of new program we create.Lets run a number before the clock ,go to program,click on plus sign,click on add text.We had a number in the space which we had saved like 12345 then press send.
Step 11 Now we run clock ist delete the number then again go to program then add clock.Here we see two types of clock you can select clock of your choice then click on send.In this way you can run your display.
Video Tutorial – P10 single color (W0) Wi-Fi controller